Sony MHC-D60 manual PlayingCDswithout interruption, Programming the CD tracks, Non Stop Play

Programming the CD tracks (continued)

To	Press
Check the program	CHECK on the remote
	repeatedly. After the last
	track, “CHECK END”
	appears.
Clear a track from	CLEAR on the remote in
the end	stop mode.
Clear a specific	CHECK on the remote
track	repeatedly until the
	number of the track to be
	erased lights up, then press
	CLEAR.
Add a track to the	1 Select the disc tray with a
program	DISC 1~3 button.
	2 Select the track by
	turning the jog dial.
	3 Press ENTER/NEXT.
Clear the entire	¹once in stop mode or
program	twice while playing.

PlayingCDswithout interruption

–– Non Stop Play

You can play CDs without pausing between tracks.

POWER	2	3 1
0	)	¹
	¤	á¸

Tips

•The program you made remains in the CD player even after it has been played back. Press Ḡto play the same program again.

•If “--.--” appears instead of the total playing time during programming, this means:

–you have programmed a track number which exceeds 20

–the total playing time has exceeded 100 minutes.

1 Press FUNCTION repeatedly until “CD” appears in the display, then place a CD.

2 Press NON-STOP so that the indicator on the button lights up.

3 Press á¸.

To cancel Non Stop Play

Press NON-STOP so that the indicator on the button goes out.

22