28
GB
MHC-EC919iP/EC719iP.4-467-786-22(1)

To change the AM tuning interval

(except for European model)

The AM tuning interval is preset to
9kHz or 10 kHz by factory default. Use
buttons on the unit to change the AM
tuning interval.
1
Tune to any AM station.
2
Hold down OPTIONS on the unit
until “530” or “531” appears on the
display.
All the AM preset stations are
erased.

To reset the system to factory

settings

If the system still does not operate
properly, reset the system to factory
settings.
1
Disconnect and reconnect the
power cord, and then turn on the
system.
2
Hold down and EQ on the unit
until “RESET OK” appears.
All user-congured settings, such
as preset radio stations, timer, and
the clock, are deleted.

To turn o the automatic standby

function

This system is equipped with an
automatic standby function. With this
function, the system enters standby
mode automatically in about 30
minutes when there is no operation or
audio signal output.
By default, the automatic standby
function is turned on.
Use buttons on the unit to turn o the
automatic standby function.
Hold down  while the system
is on, until “AUTO STANDBY OFF”
appears.
To turn on the function, repeat the
procedure until “AUTO STANDBY
ON” appears.
Notes
The automatic standby function is invalid
for the tuner function (FM/AM).
The system may not enter standby mode
automatically in the following cases:
when an audio signal is detected.
when an iPod/iPhone is connected.
during playback of audio tracks or les.
while the preset Play Timer or Sleep
Timer is in process.