Creating your own program

— Program Play

You can make a program of up to 25 steps from all the discs in the order you want to play them. You can synchro record the programmed tracks onto a cassette tape (page 17).

MP3 audio tracks cannot be played on MHC-GX25 and MHC-RG220 (except for European and Russian models).

Using the display window

1 Press CD.

2 Press PLAY MODE in stop mode repeatedly until “PGM” appears.

3 Press D.SKIP (or DISC 1 – 3 or DISC SKIP/EX-CHANGE on the unit) to select a disc.

To program all the tracks on a disc at once, proceed to step 5 with “AL” displayed.

4 Press . or > repeatedly until the desired track number appears.

When programming an MP3, press ALBUM – or + to select album, then press

.or > repeatedly until the desired track number appears.

Disc tray number Selected track number

Total playing time (including selected track)

5 Press ENTER.

The track is programmed.

The program step number appears, followed by the total playing time.

6 Program additional discs or tracks.

To program

Repeat steps

Other discs

3 and 5

Other tracks on the

4 and 5

same disc

 

Other tracks on

3 to 5

other discs

 

7 Press N.

Program Play starts.

Other operations

To

Do this

Cancel Program

Press PLAY MODE in stop

Play

mode repeatedly until “PGM”

 

disappears.

Clear a track from

Press CLEAR in stop mode.

the end

 

Tips

•The program you made remains after Program Play finishes. To play the same program again, press CD, then press N. However, the program is cleared when you open the disc tray.

•“– –.– –” appears when the total CD program time exceeds 100 minutes, or when you select a CD track whose number is 21 or over, or when you select an MP3 audio track.

12GB