Other operations
To | Do this | |
Check the setting | 1 | Press CLOCK/TIMER |
|
| SELECT. |
| 2 | Press . or > |
|
| repeatedly until “REC |
|
| SELECT” appears, then |
|
| press ENTER. |
|
| |
Change the setting | Start over from step 1. | |
Cancel the timer 1 Press CLOCK/TIMER SELECT.
2Press . or > repeatedly until “TIMER OFF” appears, then press
ENTER.
Notes
•You cannot activate the Daily Timer and recording timer at the same time.
•If you use the recording timer, the Daily Timer and the Sleep Timer at the same time, the Sleep Timer has priority.
•If the system is on at the preset time, the timer- recording will not be activated.
•The volume is reduced to minimum during recording.
Display
Turning off the display
— Power Saving Mode
The demonstration display (display window and buttons lighting and flashing even when the system power is off) and the clock display can be turned off to minimize the amount of power consumed during standby (Power Saving Mode).
Press DISPLAY repeatedly while the system is off until the demonstration display or the clock display disappears.
To cancel Power Saving Mode
Press DISPLAY while the system is off. Each time you press the button, the display switches cyclically as follows:
Demonstration display t Clock display* t No display (Power Saving Mode)
* The clock is displayed only if you set the clock.
Note
You cannot perform the following operations in Power Saving Mode.
–setting the clock
–changing the AM tuning interval (except for European, Russian, Middle Eastern and Philippine models)
–turning on the system by pressing the function buttons
Tip
The timer continues to operate in Power Saving Mode.