Other Operations

To

Do this

Tune in a station

Follow the procedure described

with a weak signal

in “Manual tuning preset”

 

(page 13).

 

 

Set another station

Start over from step 1. After

to the existing

step 3, press PRESET –/+ (or

preset number

. or > on the unit)

 

repeatedly to select the preset

 

number you want to store the

 

other station.

 

 

To change the AM tuning interval (except for European, Russian, Middle Eastern and Philippine models)

The AM tuning interval is factory-preset to

9kHz (or 10 kHz for some areas). To change the AM tuning interval, tune in any AM station first, then turn off the system. While holding TUNER/ BAND on the unit, press ?/1 on the unit. When you change the interval, all the AM preset stations are erased. To reset the interval, repeat the same procedure.

Note

You cannot change the AM tuning interval in the Power Saving Mode.

Tips

•The preset stations are retained for about a day even if you disconnect the power cord or if a power failure occurs.

•To improve the reception, adjust the supplied antennas or connect an external antenna.

Listening to the radio

You can listen to a radio station either by selecting a preset station, or by manually tuning in the station.

Listening to a preset station

— Preset Tuning

Preset radio stations in the tuner’s memory first (see “Presetting radio stations” on page 13).

1 Press TUNER/BAND repeatedly to select “FM” or “AM”.

2 Press PRESET –/+ (or . or > on the unit) repeatedly to select the desired preset station.

Preset number

 

Frequency

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

14GB