
Recording to a tape
––CD Synchro Recording/High Speed Dubbing/Recording Manually/ Program Edit
You can record from a CD, tape, radio or other connected component. The recording level is adjusted automatically.
Steps | Recording from a CD | Recording from a tape | Recording Manually |
|
|
(CD Synchro Recording) |
|
| |||
|
|
|
| ||
|
|
|
|
|
|
1 | Insert a recordable tape into deck B. |
|
|
| |
|
| Tape | |||
|
|
|
|
| |
2 | Press CD. | Press TAPE A/B repeatedly | Press a function button |
| |
|
| to select TAPE A. | for the recording source. |
|
|
3 | Load the CD you want to | Load the tape you want to | Load the CD or tape |
|
|
| record. | record into deck A. | (or other audio |
|
|
|
|
| sources), or tune to the |
|
|
|
|
| station you want to |
|
|
|
|
| record. |
|
|
|
|
|
|
|
|
4 | Press CD SYNC |
| Press REC PAUSE/ |
|
|
|
|
| START. |
|
|
| DECK B stands by for recording. |
|
|
| |
| REC PAUSE/START indicator flashes. |
|
|
| |
|
|
|
| ||
5 | Press DIRECTION repeatedly to select gto record on one side. |
|
| ||
| Select j(or RELAY) to record on both sides. |
|
|
| |
6 | Press REC PAUSE/START. If you are recording manually, press hH to start |
|
| ||
| playing the source (for CD or Tape). |
|
|
| |
| Recording starts. |
|
|
|
|
|
|
|
|
|
|
7 | Press x to stop recording. |
|
|
|
|
|
|
|
|
|
|
Tips
•When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.
•For recording from the reverse side:
After step 1, press TAPE A/B to select deck B and press hH twice to start playback of the reverse side. Press x at the point where you want to start recording. The TAPE B reverse side indicator lights up.
•
If you set direction to jwhen the tapes you use have different lengths, the tapes in each deck reverses independently. If you select RELAY, the tapes in both decks reverse together.
•For recording from the radio:
If noise is heard while recording from the radio, move the respective antenna to reduce the noise.
•For recording from a CD to a tape manually:
You can press . or > to select tracks during recording pause mode (after step 4 and before step 6).
•You can mix the sound from the component connected to the GAME INPUT jacks with another function such as CD, tape, radio or an MD connected to this system. To record the mixed sound, press GAME MIXING after step 4 of “Recording Manually” and then press REC PAUSE/START to start recording. Game Mixing does not function during
Note
You cannot listen to other sources while recording.
continued