Adjusting the graphic equalizer and storing a personal file

You can adjust the sound by raising or lowering the level of specific frequency band, then store up to three personal files (P FILE) in the memory.

Before operation, select the preset effect you want for your basic sound.

1 Press b or B repeatedly to select a frequency band or surround, then press v or V to adjust the level or select the surround effect.

Frequency band

Frequency level

2 Press and hold P FILE until the personal file number appears in the display.

3 Press v or V or B or b to select the personal file number (P FILE) where you want to store the equalizer setting.

4 Press ENTER.

The setting is automatically stored as the personal file you selected in step 3. The previous setting stored at this memory location is erased and replaced by the new setting.

To call up the personal file

Press P FILE repeatedly until the personal file number you want appears in the display.

Tip

If you do not want to store a personal file, press ENTER after step 1.

Selecting the surround

effect

Press SURROUND.

Each time you press the button, the display changes as follows:

SURROUND ON (SUR)

Y

SURROUND OFF

Note

When you choose other sound effects, the surround effect may be cancelled.

Sound Adjustment

17GB

MHC-RG77 4-238-409-13(1)

Page 17
Image 17
Sony MHC-GX8000/RG77 Selecting the surround Effect, To call up the personal file, Press Surround, Sound Adjustment