2
3
Prepare the recording source.
For CD Synchro Recording:
Press FUNCTION repeatedly to select “DVD,” then load the disc you want to record. If you have already loaded the disc, press DISC 1 DISC 3 to select the disc. When the system automatically starts playback, press twice to cancel resume play.
For Manual Recording and Sound Mixing:
Select the desired source to record or mix.
To record only your favorite CD tracks in your desired order, perform steps 1 to 6 of “Creating your own program” (page 34).
To record only sound from a microphone, press FUNCTION repeatedly to select “AUDIO IN,” and do not connect any component to the AUDIO IN jack .
Start recording.
For CD Synchro Recording:
Press .
The CD starts playing automatically after 10 seconds have passed.
For Manual Recording:
Start playing the desired recording source, then press .
If there is noise while recording from the tuner, reposition the appropriate antenna to reduce the noise.
For Sound Mixing:
Press , and then start playing the desired source and start singing or speaking into the microphone.
If acoustic feedback (howling) occurs, reduce the volume, move the microphone away from the speakers, or change the direction of the microphone.
To stop recording
Press .
Notes
CD Synchro Recording is not available with DVDs, DATA CD/DVDs.
You cannot listen to other sources while recording.
If you connect or disconnect a microphone or headphones during recording, the sound may cut off for a moment.
When “DVD” function or “USB” function is selected, Karaoke Mode is automatically
turned on when you connect a microphone to MIC jack .
The system may continue playback of other discs even after the Synchro Recording is completed.
Tape