The JPEG image file format does not conform to DCF.
The JPEG image file has the extension “.jpg” or “.jpeg”, but is not in JPEG format.
The disc title,
Use a disc that conforms to the ISO 9660 Level 1, Level 2, or Joliet (expansion).
The character code that can be displayed by this system are as follows: Upper cases (A to Z)
Numbers (0 to 9)
Symbols (< > * +, ? / [ ] \ _) Other characters appear as “_”.
The surround effect is difficult to hear when you are playing a Dolby Digital or MPEG audio sound track.
Make sure the sound field is set properly (page 78).
Check the speaker connection (page 20).
Depending on the DVD VIDEO, the output signal may not be the entire 5.1 channel. It may be monaural or stereo, even if the sound track is recorded in Dolby Digital or MPEG audio format.
The sound loses stereo effect when you play back a DVD VIDEO, VIDEO CD, AUDIO CD or MP3 audio track.
Unplug the microphone or press KARAOKE MODE repeatedly until “” disappears from the display.
Make sure the system is connected properly.
Check the speaker connection (page 20).
USB device
You cannot start transferring or recording to an USB device.
The following problems may have occurred.
The USB device is full.
The number of tracks and folders on the USB device has reached the upper limit.
The USB device is
Transferring or recording is stopped before it is finished.
You are using an unsupported USB device. Refer to “Compatible USB devices” (supplement) for the supported device types.
The USB device is not formatted correctly. Refer to the operating instructions supplied with the USB device for how to format.
Turn off the system and remove the USB device. If the USB device has a power switch, turn the USB device off and then on again after removing it from the system. Then perform transferring again.