1 Press TUNER BAND repeatedly until the band you want appears in the display.

The bands you can receive vary depending on the model you purchased. Be sure to check which bands you can receive.

Every time you press the button, the band changes as follows:

2 band model: FM ˜AM

3 band model:

FM nMW nSW n

or

FM nAM nUKV* n

*“STEREO PLUS” is displayed when you select UKV.

2 Turn the jog dial (or press =or

+on the remote) to tune in the desired preset station.

Turn counter-

Turn clockwise

clockwise

(or press +

(or press = ￿￿

+ on the remote)

on the remote)

for higher

for lower preset

preset numbers.

numbers.

 

Preset number

Frequency

 

TUNED

 

STEREO

 

M H z

When only one station is preset, “ONE

PRESET” appears in the display.

To

Do this

Turn off the radio

Press 1/u(power).

Adjust the volume

Turn VOLUME (or

 

press VOLUME +/– on

 

the remote).

 

 

To listen to non-preset radio stations

Use manual or automatic tuning. For manual tuning, press – or + repeatedly. For automatic tuning, press and hold – or +.

Tips

•Pressing TUNER BAND when the power is off automatically turns the power on and tunes to the last received station (One Touch Play). When the system is in the Power Saving Mode, the One Touch Play function does not work.

•You can switch from another source to the radio just by pressing TUNER BAND (Automatic Source Selection).

•When an FM programme is noisy, press STEREO/ MONO so that “MONO” appears in the display. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo effect.

•To improve broadcast reception, reorient the supplied antennas.

Operations Basic

13