Step 2: Setting the time

1 Press CLOCK/TIMER.

The hour indication flashes.

You must set the time before using the timer functions.

The clock is on a 24-hour system for the European model, and a 12-hour system for other models.

The 24-hour system model is used for illustration purposes.

·￿

ª￿·￿

ª￿·￿

=+ p

0 ) P

3,5 V

v

b

2,4

B

 

·￿

 

p

1

2 Press Vor vto set the hour.

The clock is on a 24-hour system for the European model and a 12-hour system for other models.

3 Press ENTER.

The minute indication flashes.

4 Press Vor vto set the minute.

5 Press ENTER.

The clock starts working.

Tips

•If you’ve made a mistake, start over from step 1.

•Setting the time deactivates the demo mode. If you want to display the demo mode, press DISPLAY (U.S.A., Canadian and European models) or DEMO (STANDBY) (other models) when the power is off.

To change the time

The previous explanation shows you how to set the time while the power is off. To change the time while the power is on, do the following:

1Press CLOCK/TIMER.

2Press Vor vto select the SET CLOCK.

3Press ENTER.

4Perform steps 2 through 5 above.

Note

The clock settings are cancelled when you disconnect the power cord or if a power failure occurs.

7