Sony MHC-NX1 Step 1: Hooking up the system (continued), Tip, Tip, Note, When carrying this system, To connect optional components, To deactivate the demonstration

Step 1: Hooking up the system (continued)

4For models with a voltage selector, set VOLTAGE SELECTOR to position of your local power line voltage.

VOLTAGE SELECTOR

	-
230	240V
120V	220V

5Connect the power cord to a wall outlet.

The demonstration appears in the display. When you press 1/u, the system turns on and the demonstration automatically ends.

If the supplied adapter on the plug does not fit your wall outlet, detach it from the plug (only for models equipped with an adapter).

To connect optional components

See page 35.

To deactivate the demonstration

When you set the time (Step 2: Setting the time), the demonstration is deactivated.

To activate/deactivate the demonstration again, press DISPLAY (U.S.A., Canadian and European models) or DEMO (STANDBY) (other models) while the system is off.

Tip

You can reinforce the bass sound by connecting an optional super woofer to the super woofer connector.

To attach the front speaker pads

Attach the supplied front speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping.

Inserting two size AA (R6) batteries into the remote

	]
}	}
	]

Tip

With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones.

Note

If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage.

When carrying this system

Do the following to protect the CD mechanism.

1Press CD (or FUNCTION on the remote repeatedly) until “CD” appears in the display.

2Hold down ENTER and press 1/uso that “LOCK” appears in the display.

6