Timer-recording radio programmes

To timer-record, you must preset the radio station (see “Step 3: Presetting radio stations”) and set the clock (see “Step 2: Setting the time”) beforehand.

7

·￿

ª￿·￿

ª￿·￿

￿= + p

￿

0 )

 

P

3,4

V

 

3,4

B

b

 

 

 

v

 

 

 

·￿

 

p

4 Set the time to start recording.

Press Vor vto set the hour, then press

ENTER.

The minute indication starts flashing.

REC

Press Vor vto set the minute, then press

ENTER.

The hour indication flashes again.

5 Set the time to stop recording following the above procedure.

The start time appears, followed by the stop time, the recording source and the radio station, then the original display appears.

6 Insert a recordable tape into deck B.

7 Turn off the power.

2

TIMER SELECT

When the recording starts, the volume level is set to the minimum.

To check the setting

Press TIMER SELECT and press Vor vto select “REC”, then press ENTER. To change the setting, start over from step 1.

1 Tune in the preset radio station (see “Listening to the radio” on page 12).

2 Press CLOCK/TIMER.

“SET (DAILY 1)” appears.

3 Press Vor vto select “REC”, then press ENTER.

“ON” appears and the hour digits flash in the display.

REC

To cancel the timer operation

Press TIMER SELECT and press Vor vto select “TIMER OFF”, then press ENTER.

Note

If the power is on at the preset time, the recording will not be made.

34