Press TUNER MEMORY.
Press – or + (or TUNING – or + on the unit) repeatedly to select the desired preset number.
Press ENTER.
Press – or + (or TUNING – or + on the unit) repeatedly to select the desired preset number.
Press ENTER.

6

7

8 Repeat steps 2 through 7 to store other stations.

Tip

Press TUNING MODE to stop scanning.

Manual tuning preset

You can manually tune in and store the radio frequency of the desired stations.

1 Press TUNER BAND (or FUNCTION repeatedly) to switch the function to tuner.

2 Press TUNER BAND repeatedly to select “FM” or “AM”.

3 Press TUNING MODE repeatedly until “AUTO” and “PRESET” disappear from the display.

4 Press – or + (or TUNING – or + on the unit) repeatedly to tune in the desired station.

5

6

7

8 Repeat steps 2 through 7 to store other stations.

Other operations

To

Do this

Tune in a station

Follow the procedure described

with a weak signal

in “Manual tuning preset”

 

(page 13).

 

 

Set another station

After step 5, press – or + (or

to the existing

TUNING – or + on the unit)

preset number

repeatedly to select the preset

 

number you want to store the

 

station.

 

 

To improve tuner reception

When tuner reception is poor, set CD player power off by CD power manage function.

CD power is factory set to on. Use buttons on the unit for the operation.

1Press CD.

2Press ?/1 to turn off the system.

3Press ?/1 while holding x. “CD POWER OFF” appears.

To set CD power on

Repeat the procedure above and “CD POWER ON” appears.

Notes

•When “CD POWER OFF” is selected, disc access time is increased.

•You cannot change the setting in Power Saving Mode (page 23).

To change the AM tuning interval (except for European, Russian and Saudi Arabian models)

The AM tuning interval is factory-preset to

9kHz (or 10 kHz for some areas). To change the

AM tuning interval, tune in any AM station first, then turn off the system. While holding x, press ?/1 on the unit. When you change the interval,

all the AM preset stations are erased. To reset the interval, repeat the same procedure.

Note

You cannot change the AM tuning interval in Power Saving Mode (page 23).

Tips

•The preset stations are retained for about half a day even if you disconnect the power cord or if a power failure occurs.

•To improve broadcast reception, adjust the supplied antennas, or connect a commercially available external antenna.

Tuner
13GB