Tips

•When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.

•If you select both sides recording and the tape reaches the end of the front side part-way through a track, the entire track is recorded again from the beginning of the reverse side.

Recording on a tape manually

— Manual Recording

You can record just the portions you like from a CD, tape or radio program on a tape.

You can also record from connected components (see “Hooking up optional components” on page 25).

Use buttons on the unit for the operation.

1 Load a recordable tape into deck B.

2 Press TAPE A/B to select deck B, then press nN repeatedly to select recording side. And press x to stop playback.

3 Press PLAY MODE on the remote repeatedly to select “g” to record on one side. Select “j” (or “RELAY”) to record on both sides.

4 Press one of the following buttons to select the desired source to record.

•CD: To record from this system’s CD player.

•TAPE A/B: To record from this system’s tape deck A.

•TUNER/BAND: To record from this system’s tuner.

•VIDEO/MD: To record from the optional component connected to the VIDEO/MD IN jacks.

5 Press z START.

Deck B stands by for recording. “REC” flashes.

6 Press z START, then start playing the desired source to record.

Recording starts.

Other operations

To

Do this

Stop recording

Press x.

 

 

Pause recording

Press z START on the unit.

 

 

18GB