You can listen to a radio station either by selecting a preset station, or by manually tuning in the station.
Listening to a preset station
— Preset Tuning
Preset radio stations in the tuner’s memory first (see “Presetting radio stations” on page 12).
1 Press TUNER BAND (or FUNCTION repeatedly) to switch the function to tuner.
2
3
4 Press – or + (or TUNING – or + on the unit) repeatedly to select the desired preset station.
Listening to non-preset radio station
— Manual Tuning
1 Press TUNER BAND (or FUNCTION repeatedly) to switch the function to tuner.
2 Press TUNER BAND repeatedly to select “FM” or “AM”.
3 Press TUNING MODE repeatedly until “AUTO” and “PRESET” disappear from the display.
4 Press – or + (or TUNING – or + on the unit) repeatedly to tune in the desired station.
Note
When switching to CD function from tuner, a longer time may be required to access the disc. In this case, set “CD POWER ON” by CD power manage function (page 13).
Tips
•To improve broadcast reception, adjust the supplied antennas, or connect a commercially available external antenna.
•When an FM stereo program has static noise, press FM MODE repeatedly until “MONO” appears. There will be no stereo effect, but the reception will improve.
•Press TUNING MODE repeatedly until “AUTO” appears in step 3 above, then press – or + (or TUNING – or + on the unit). The frequency indication changes and scanning stops when the system tunes in a station (Automatic Tuning).
•To record the radio programs, use manual recording (page 18).