Sony MHC-R700, MHC-GRX9000 Playing a tape, Press ¤and insert a recorded tape in deck a or B

Playing a tape (continued)

1 Press ¤and insert a recorded tape in deck A or B.

With the side you want to play facing forward

Tips

•Pressing TAPE A (or TAPE B) ( or 9 when the power is off automatically turns the power on and starts tape playback if there is a tape in the deck (One Touch Play).

•You can switch from another source to the tape deck just by pressing TAPE A (or TAPE B) ( or 9 (Automatic Source Selection).

•When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR so that “DOLBY NR” appears.

•When dubbing tapes originally recorded with Dolby NR, the dubbed tape is automatically played with Dolby NR.

2 Press DIRECTION repeatedly to select Ato play one side. Select §* to play both sides.

To play both decks in succession, select RELAY (relay play).**

3 Press TAPE A (or TAPE B) ( (DECK A (or DECK B) ( on the remote).

Press TAPE A (or TAPE B) 9to play the reverse side. (Press DECK A (or DECK B) (again on the remote to play the reverse side.) The tape starts playing.

*The deck stops automatically after repeating the sequence five times.

**Relay play always follows the following sequence:

Deck A (front side), Deck A (reverse side), Deck B (front side), Deck B (reverse side).

To	Do this
Stop play	Press p.
Pause	Press PPAUSE. Press
	again to resume play.
Fast-forward	Press 0or ).
Rewind	Press 0or ).
Remove the cassette	Press ¤.
Adjust the volume	Turn VOLUME (or press
	VOL +/– on the remote).

Searching for the beginning of a track (AMS*)

During playback, turn the jog dial the same direction as the 9 or ( indicator to go forward. Turn the opposite direction to go back. (Or press = or +on the remote.)

The search direction, + (forward) or – (back), and number of songs being skipped (1~9) appear in the display.

Example: searching forward 2 songs

* AMS (Automatic Music Sensor)

Notes

The AMS function may not operate correctly under the following circumstances:

–When the unrecorded space between songs is less than 4 seconds long.

–If completely different information is recorded on the left and right channels.

–When there are continuous sections of extremely low level or low frequency sound (like those of a baritone sax).

–When the unit is placed near a television. (In this case, we recommend moving the unit farther away from the television or turning off the television.)

18