Waking up to music
— Daily Timer
You can wake up to music at a preset time. Make sure you have set the clock (see “ Setting the time” on page 9).
1 Prepare the music source you want to play.
•CD: Load a CD. To start from a specific track, make a program (see
“ Programing CD tracks” on page 11).
•Tape: Load a tape with the side you want to play facing forward.
•Radio: Tune in the preset station you want (see “ Listening to the radio” on page 14).
2 Adjust the volume.
3 Press CLOCK/TIMER SET on the remote.
“ SET DAILY 1” appears.
4 Press v or V repeatedly to select “DAILY 1 (or 2)”, then press ENTER.
“ON” appears and the hour indication flashes.
5 Set the time to start playing.
Press v or V repeatedly to set the hour, then press B.
The minute indication flashes.
Press v or V repeatedly to set the minute, then press ENTER.
6 Repeat step 5 to set the time to stop playing.
7 Press v or V repeatedly until the music source you want appears.
The indication changes as follows:
tTUNER y CD PLAY T
tTAPE PLAY T
8 Press ENTER.
The type of timer (“ DAILY 1” or “ DAILY 2” ), followed by the start time, stop time, and the music source, appear, then the original display appears.
9 Press ?/1 to turn off the system.
To | Do this |
Check the setting | Press CLOCK/TIMER |
| SELECT on the remote and |
| press v or V repeatedly to |
| select the respective mode |
| (“ DAILY 1” or “ DAILY 2” ), |
| then press ENTER. |
|
|
Change the setting | Start over from step 1. |
|
|
Cancel the timer | Press CLOCK/TIMER |
| SELECT on the remote and |
| press v or V repeatedly to |
| select “ TIMER OFF” , then |
| press ENTER. |
|
|
Tip
The system turns on 15 seconds before the preset time.
Notes
•You cannot activate DAILY 1 and DAILY 2 timer at the same time.
•When you use the Sleep Timer, the Daily Timer will not turn on the system until the Sleep Timer turns it off.
•You cannot activate the Daily Timer and Timer- recording at the same time.
Features Other
23