Hooking up the system (continued)

Positioning the speakers

1 Place the front speakers at an angle of

45 degrees from your listening position.

Center surround speaker

Front

Front

speaker

speaker

(R)

(L)

 

45º

Rear

Rear

surround

surround

speaker

speaker

(R)

(L)

2 Place the center surround speaker at about the same height as the front speakers. Align the center surround speaker with the front speakers or place it slightly behind the front speakers.

3 Place the rear surround speakers facing each other at about 60 to 90 cm above your listening position.

Rear surround

speaker

60 to 90 cm

Adjusting the speaker volume

To enjoy Dolby Pro Logic Surround sound, turn on the Dolby Pro Logic mode, then adjust the volume of each speaker using the test tone provided by the system.

1Press PRO LOGIC (or PRO LOGIC ON/ OFF on the remote).

“ PRO LOGIC ON” appears.

2Press TEST TONE on the remote.

Each speaker emits the test tone cyclically in the following order.

LEFT (front) t CENTER

t RIGHT (front) t REAR R (right) t REAR L (left)

3From your listening position, press REAR/CENTER LEVEL on the remote to adjust the volume of the rear surround speakers.

4Press v or V repeatedly to select the volume level.

8