Sony MHC-RX900 manual Basic Operations, Do this

To	Do this
Stop play	Press p.
Pause	Press CD (P(Pon the
	remote). Press again to resume
	play.
Select a track	During play or pause, turn the
	jog dial clockwise (to go
	forward) or counterclockwise
	(to go back) and release it
	when you reach the desired
	track. (Or press +(to go
	forward) or =(to go back)
	on the remote.)
Find a point in	Press and hold down )or
a track	0during play and
	release it at the desired point.
Select a CD	Press a DISC 1~3 button or
in stop mode	DISC SKIP/EX-CHANGE.
Play only the	Press PLAY MODE
CD you have	repeatedly until “1 DISC”
selected	appears.
Play all CDs	Press PLAY MODE repeatedly
	until “ALL DISCS” appears.
Remove the CD	Press ¤.
Exchange other	Press DISC SKIP/
CDs while	EX-CHANGE.
playing
Adjust the	Turn VOLUME (or press VOL
volume	+/– on the remote).

Tips

•Pressing CD (P when the power is off automatically turns the power on and starts CD playback if there is a CD in the tray (One Touch Play).

•You can switch from another source to the CD player and start playing a CD just by pressing CD (Por the DISC 1~3 buttons (Automatic Source Selection).

•If there is no CD in the player, “CD NO DISC” appears in the display.

•When a disc tray holding a CD is selected (or playing), the DISC 1~3 button for that tray lights green. When a disc tray holding a CD is not selected, the DISC 1~3 button for that tray lights orange. When all disc trays are empty, the DISC 1~3 buttons all light green.

Basic Operations

13