Sony MHC-RX900 Playing CDs without interruption, Programming the CD tracks continued, Press CD P

Programming the CD tracks (continued)

To cancel Program Play

Press PLAY MODE repeatedly until “PROGRAM” or “SHUFFLE” disappears from the display.

To	Press
Check the	CHECK on the remote
program	repeatedly. After the last
	track, “CHECK END”
	appears.
Clear a track from	CLEAR on the remote in
the end	stop mode.
Clear a specific	CHECK on the remote
track	repeatedly until the
	number of the track to be
	erased lights up, then press
	CLEAR.
Add a track to the	1 Select the disc tray with a
program	DISC 1~3 button.
	2 Select the track by
	turning the jog dial.
	3 Press ENTER/NEXT.
Clear the entire	ponce in stop mode or
program	twice while playing.

Tips

•The program you made remains in the CD player even after it has been played back. Press CD (P to play the same program again.

•If “--.--” appears instead of the total playing time during programming, this means:

–you have programmed a track number which exceeds 20.

–the total playing time has exceeded 100 minutes.

Playing CDs without interruption

–– Non-Stop Play

You can play CDs without pausing between tracks.

(Power) 1 2 3

1 Press FUNCTION repeatedly until “CD” appears in the display, then place a CD.

2 Press NON-STOP to light the indicator.

“NON-STOP PLAY” appears in the display.

3 Press CD (P.

To cancel Non-Stop Play

Press NON-STOP so that the indicator goes out and “NON-STOP OFF” appears in the display.

24