Sony MHC-RXD5 Recording a CD, CD Synchro Recording, Press 6and insert a blank tape into deck B

Recording a CD

— CD Synchro Recording

The CD SYNC button lets you record from a CD to a tape easily. You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is adjusted automatically.

DISC SKIP/

EX-CHANGE

	CD	2
(Power) DOLBY NR (P

6 6

4 p 5 3 1

1 Press 6and insert a blank tape into deck B.

With the side
you want to
record facing	~ 6
forward

2 Press ¤ and place a CD.

Then press again to close the disc tray. If the indicator for the tray you want to record is not lit green, press DISC SKIP/ EX-CHANGE repeatedly so that it lights green.

With the label side up. When you play a CD single, place it on the inner circle of the tray.

3 Press CD SYNC.

Deck B stands by for recording and the CD player stands by for playback. The indicator on TAPE B ( (for front side) lights up.

4 Press DIRECTION repeatedly to select A to record on one side. Select § (or RELAY) to record on both sides.

5 Press REC PAUSE/START.

Recording starts.

To stop recording

Press p.

Tips

•If you want to record from the reverse side, press TAPE B 9 to light its indicator after pressing CD SYNC.

•When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.

•When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR so that “DOLBY NR” appears after pressing CD SYNC.

Note

You cannot listen to other sources while recording.

12