Picture abnormal or unview ble |
|
| Page |
The picture on the television is | ≥Ensure that the unit is connected directly to the television, and is not connected through a video | 6 | |
not displayed correctly or | cassette recorder. |
|
|
disappears. | ≥Mobile telephone chargers can cause some disturbance. | — | |
| ≥If you are using an indoor television antenna, change to an outdoor antenna. | — | |
| ≥The television antenna wire is too close to the unit. Move it away from the unit. | — | |
Picture size does not fit t e | ≥Change “TV Aspect” in the “Video” tab. | 22 | |
screen.HT640W.bookPage31Thursday, | January5,200611:19≥Use the television to changeAM | the aspect. If your television does not have that function, change “4:3 | 20 |
| Aspect” in Display Menu. |
|
|
| ≥Change the zoom setting. (“Just Fit Zoom” or “Manual Zoom” in Display Menu) | 20 | |
|
|
| |
Menu is not displayed correctly. | ≥Restore the zoom ratio to “a1.00”. (“Manual Zoom” in Display Menu) | 20 | |
| ≥Set “Subtitle Position” in Display Menu to “0”. | 20 | |
| ≥Set “4:3 Aspect” in Display Menu to “Normal”. | 20 | |
Auto zoom function does not work | ≥Turn off television’s zoom function. | — | |
well. | ≥Use the other preset aspect ratios or manual adjustment. | 20 | |
| ≥Zoom function may not work well, especially in dark scenes and may not work depending on the | — | |
| type of disc. |
|
|
|
|
|
|
Progressive video |
|
|
|
|
|
| |
There is ghosting when | ≥This problem is caused by the editing method or material used on | 19 | |
progressive is on. | corrected if you use interlaced output. Set “Video Output Mode” in Picture Menu to “480i”. |
| |
| (Alternatively, press and hold [CANCEL] to switch to “480i”.) |
| |
Pictures not in progressive | ≥Select “480p” in “Video Output Mode” in Picture Menu. | 19 | |
output. | ≥The unit’s VIDEO OUT or | 6 | |
| displayed. |
|
|
|
|
| |
Closed captions not displayed. | ≥When progressive output is on, closed captions will not be displayed. | — | |
Listening to the radio |
|
|
|
|
|
| |
Distorted sound or noise is heard. | ≥Adjust the position of the FM or AM antenna. | — | |
“ST” flickers or doesn’t light. | ≥Use an outdoor antenna. |
| 25 |
A beat sound is heard. | ≥Turn the television off or move it away from the unit. | — | |
|
|
| |
A low hum is heard during AM | ≥Separate the antenna from other cables. | — | |
broadcasts. |
|
|
|
Unit displays |
|
|
|
The display is dark.
“NOPLAY”
“NODISC”
“F61”
“DVD U11”
“ERROR”
“DVD H∑∑”
∑∑stands for a number.
“[W]” is flashing.
“D.MIX” is flashing.
≥Select “Bright” in “FL Dimmer” in the “Others” tab.
≥You inserted a disc the unit cannot play; insert one it can.
≥You inserted a blank disc.
≥You inserted a disc that has not been finalized.
≥You have not inserted a disc; insert one.
≥You have not inserted the disc correctly; insert it correctly.
≥Check and correct the speaker cable connections. If this does not fix the problem, consult the dealer.
≥Disc may be dirty. Wipe it clean.
≥Incorrect operation performed. Read the instructions and try again.
≥Trouble may have occurred. The number following “H” depends on the status of the unit. Turn the unit off and then back on. Alternatively, turn the unit off, disconnect the AC power supply cord, and then reconnect it.
≥If the service numbers fail to clear, note the service number and contact a qualified service person.
≥There is no link between the main unit and the surround speaker. Check that the surround speaker is plugged into the AC outlet.
≥Ensure that the digital transceiver is fully inserted into the slot of the main unit.
≥Ensure that the wireless selector on the surround speaker is set to “ON”.
≥
22
10
—
—
—
12
5
10
—
—
—
—
—
9
—
Troubleshooting guide
Television displays
“/” | ≥The operation is prohibited by the unit or disc. | — |
“Cannot display group xx, content | ≥You are trying to display incompatible contents. | — |
xx” |
|
|
|
|
|
“This disc may not be played in | ≥Only | Cover |
your region” | this unit can be played. | page |
No | ≥Select “On” in | 22 |
|
|
|
RQT8611
31