Panasonic SC-HT640W If noise is excessive, Presetting the channel, Selecting the preset channels

HT640W.bookPage24Thursday,January5,200611:19AM		e.g. 12: [S10] ➜ [1] ➜ [2]
Using the radio
		Selecting the preset channels
TUNER/BAND	1	Press [TUNER/BAND] to select “FM” or “AM”.
Numbered	2	Press the numbered buttons to select the channel.
buttons
		≥To select a 2-digit number	PRG DISC SFC TG	D.MIX	MONO SLP
			DE
		Alternatively, press [X, W].	S
			AAC
		When a stereo FM broadcast is being received,		ST	SRD E.
		“ST” lights in the display.
					HDCD
					H.BASS
					W PGM
ENTER					1
	∫ If noise is excessive
FUNCTIONS		When “FM” is selected
		Press and hold [—FM MODE] on
				ST	SRD E.
			MONO
		the main unit to display “MONO”.			HDCD
					H.BASS
					W PGM
					1
		Press and hold [—FM MODE] again to
		cancel the mode.
		≥The mode is also canceled when you change the frequency.
		When “AM” is selected
		Press [FUNCTIONS] on the remote control.
MEMORY SELECTOR		Each time you press the button: BP 2()BP 1

Using the radio

-TUNE MODE / -FM MODE TUNING

Presetting stations automatically

Main unit only

Up to 15 stations can be set in each band, FM and AM.

1	Press [SELECTOR] to select “FM” or “AM”.
2	Press [-TUNE MODE] to select “MANUAL”.
	Each time you press the button: MANUAL()PRESET
3	Press [X TUNING W] to tune to the lowest frequency
	(FM: 87.9 or 87.5, AM: 520).
4	Press and hold [MEMORY].
	Release the button when “FM AUTO” or “AM AUTO” is displayed.

The tuner presets all the stations it can receive into the channels in ascending order.

≥“SET OK” is displayed when the stations are set, and the radio tunes to the last preset station.

≥“ERROR” is displayed when automatic presetting is unsuccessful. Preset the channels manually (➜ right).

	Manual tuning
	Main unit only
1	Press [SELECTOR] to select “FM” or “AM”.
2	Press [-TUNE MODE] to select “MANUAL”.
3	Press [X TUNING W] to select the frequency.

≥To start automatic tuning, press and hold [X TUNING W] until the frequency starts scrolling. Tuning stops when a station is found.

∫Presetting the channel

Up to 15 stations can be set in each band, FM and AM.

1While listening to the radio broadcast

Press [ENTER].

2While the frequency and “PGM” are flashing on the display

Press the numbered buttons to select a channel.

≥To select a 2-digit number
	DISC SFC TG	D.MIX MONO SLP
e.g. To select 12:
[S10] ➜ [1] ➜ [2]

Alternatively, press [X, W], and then press [ENTER].

The station occupying a channel is erased if another station is preset to that channel.

RQT8611

24