Simple Setup
HT640W.bookPage8Thursday,January5,200611:19AM | ≥attempt to recharge alkaline or manganese batteries. | |
STEP 6 | Preparing the remote control | |
|
| Do not: |
Remote control | Batteries | ≥mix old and new batteries. |
|
| ≥use different types at the same time. |
|
| ≥heat or expose to flame. |
|
| ≥take apart or short circuit. |
2 Insert so the poles (i and j) match those in the remote control. | ≥use batteries if the covering has been peeled off. | |
3
1 ≥Do not use rechargeable type batteries.
R6/LR6, AA
Mishandling of batteries can cause electrolyte leakage which can severely damage the remote control.
Remove the batteries if the remote control is not going to be used for a long period of time. Store in a cool, dark place.
∫Use
Aim at the display (➜ page 9), avoiding obstacles, at a maximum range of 7 m (23 feet) directly in front of the unit.
control / Performing QUICK SETUP
STEP 7 Performing QUICK SETUP
The QUICK SETUP screen assists you to make necessary settings.
To display the picture from the main unit, turn on your television and change its video input mode (e.g. VIDEO 1, AV 1, etc.).
≥To change your television’s video input mode, refer to its operating instructions.
≥This remote control can perform some basic television operations (➜ page 28).
Preparing the remote
1 | 2 | 3 |
Turn on the | Select | Press and hold to |
unit. | “DVD/CD”. | show the QUICK |
|
| SETUP screen. |
4
Select
Register
Follow the messages and make the settings.
5
ENTER
Press to finish
QUICK SETUP.
6
Press and hold to exit.
To change these settings later
Select “QUICK SETUP” in the “Others” tab (➜ page 22).
RQT8611
8
