Panasonic SC-HT640W Using other useful functions, Using the rear MUSIC PORT, Muting the sound

HT640W.bookPage29Friday,January20,20065:50PM	DVD RDS
Using other useful functions
	Muting the sound
MUSIC P./AUX	Press [MUTING].
	“MUTING” flashes on the unit’s display.
	PL PRG	MONO SLP ST
	DDTS
	CD MODE
VOLUME	PTY PS AAC

To cancel

≥Press [MUTING] again or reduce the volume to minimum “VOL 0”, and then raise it to the required level.

≥Muting is canceled when you switch the unit to standby.

Using the Music Port

SLEEP MUTING

Setting the sleep timer

1	Press and hold [—SLEEP].
		PL PRG	MONO SLP ST	SRD E.
		DDTS		HDCD
		CD MODE		H.BASS
		DVD RDS		W PGM
		PTY PS AAC		1
2	While the time is shown
	Press [—SLEEP] to select the time (in minutes).

SLEEP 30_----)SLEEP 60_----)SLEEP 90

^""""" OFF(_ SLEEP120(__}

To cancel the timer

While the time is shown, press [—SLEEP] to select “OFF”.

To confirm the remaining time

Press and hold [—SLEEP] again.

To change the setting

Repeat the procedure from the beginning.

Using headphones

Main unit only

1 Reduce the volume and connect the headphones (not included).

Headphone plug type: 3.5 mm (1/8z) stereo

VOLUME

2	Adjust headphone volume with [VOLUME].
	≥Audio is automatically switched to 2-channel stereo.

[Note]

To prevent hearing damage, avoid listening for prolonged periods of time.

The Music Port allows you to connect and enjoy music from an external device (e.g. MP3 player) through your home theater system.

Preparation
≥Make sure that the wireless selector on the surround speaker is set to
“ON” (➜ page 9).
≥To avoid distorted sound, make sure that any equalizer function of your		functions
external device is turned off.
1 Reduce the volume and connect the external device
(not included).
Plug type: 3.5 mm (1/8z) stereo		useful
When using the front MUSIC PORT
SURROUND MUSIC	VOLUME	Using other
External device

Reduce the volume before connecting.

When using the rear MUSIC PORT

External device Reduce the volume before connecting.

2 Press [MUSIC P./AUX] to select “FRONT MUSIC P.” or “REAR MUSIC P.”.

FRONT MUSIC P.---)REAR MUSIC P.§---)AUX

^------------------------------------------------------------------}

RG	MONO	ST	SR
DE			H
			H.B
S			W
AC

§“REAR MUSIC P.” can be selected only when the digital transceiver card is inserted into the main unit (➜ page 7).

3 Adjust the external device volume to a normal listening level, and then adjust the volume of the main unit with [VOLUME].

≥You can enjoy surround sound when you press [SURROUND MUSIC] on the main unit (except when “REAR MUSIC P.” is selected).

∫ Using the rear MUSIC PORT

When the wireless selector on the surround speaker is set to “OFF”
(➜ page 9), the wireless surround speaker can be used separately
from the main unit.	RQT8611
shown in the rear MUSIC PORT diagram (➜ above).
1 Reduce the volume of the external device and connect as
2 Adjust the volume of the external device to the desired level.
	29