Recording a VIDEO CD/CD by specifying track order
—Program Edit
1 Load a disc and load a recordable tape.
2 Program the tracks following step 2 to
6 in “ Programing VIDEO CD/CD tracks” on page 15.
3 Press CD SYNC.
The tape deck stands by to record. The VIDEO CD/CD player stands by for playback.
4 Press TUNER MEMORY/DIRECTION
repeatedly to select g to record on one side. Select h (or j) to record on both sides.
5 Press REC PAUSE/START.
Recording starts.
To record a disc with MP3 files by specifying file order
After step 1, program the MP3 files following the procedure in “ To program the MP3 files” on page 16, then proceed to step 3 above.
Tip
To check the required tape length for recording a disc, press EDIT after you have loaded a disc. The required tape length for the currently selected disc appears, followed by the total playing time for side A and side B respectively (Tape Select Edit).
Notes
•You cannot use Tape Select Edit for discs containing over 20 tracks.
•You cannot use Tape Select Edit for discs containing MP3 files.
Timer-recording radio
programs
To
20)and set the clock (see “ Setting the clock” on page 10).
1 Tune in the preset radio station (see “ Listening to the radio” on page 22).
2 Press CLOCK/TIMER SET on the remote.
“ DAILY SET?” appears.
3 Press R or r on the remote to select
“REC SET?” , then press ENTER.
“ON” appears and the hour indication flashes.
4 Set the time to start recording.
Press R or r on the remote to set the hour, then press ENTER.
The minute indication flashes.
Press R or r on the remote to set the minute, then press ENTER.
5 Set the time to stop recording following the procedure in step 4.
6 Insert a recordable tape.
Recording starts from the top side. Insert a tape with the side you want to record on facing up.
7 Press ?/1 to turn off the system.
continued
Tape