Recording on a recorded MD
There are two ways of recording on a recorded MD.
•To add to the previous recording. The previous recording will remain.
•To record over the previous recording. The previous recording will be erased.
Adding recording (the previous recording will remain)
Insert a recorded MD, and start recording (pages 6, 36 and 37). Recording will be made from the last recorded position.
If there is not enough space on the MD to record
When recording a whole CD, “CD>MD OK?” appears in the display (page 7). When recording from the radio or a CD, press DISPLAY to check the recording remaining time on the MD.
Recording over the previous recording (the previous recording will be erased)
To record over from the beginning of the MD after erasing all tracks on the
MD
First, erase all tracks on an MD (page 42). You can use the MD the same as a new one. Then, record on the MD as usual.
To record over from a specific point on the MD
1Play the MD and press MD ^to pause play at the point you want to start recording.
2Press REC to make the player in standby mode.
3Play the sound source.
4Press MD ^to start recording.
Note
When recording over from a specific point on the MD:
If the new recording is shorter than the previous recording, a part of the previous recording will remain after the recording. As you repeat this type of recording, many fragments of recording will remain on the MD. We recommend that you erase all tracks on the MD (page 42) if you no longer need to keep the recording. Then, start recording on the blank MD.
38GB Recording