| STANDBY | TIMER |
radio programmes |
| YES |
| Jog dial ENTER |
You can set timer to record the radio at a certain time. You can also record from the component connected to the LINE IN jack of the player.
Make sure you have set the clock (see “Setting the clock” on page 53).
Notes
•You cannot preset recording timer and waking up timer (page 55) at the same time.
•When recording from the component connected to the LINE IN jack of the player, refer to the operating instructions of the component.
Tip
If you made a mistake, press NO•CANCEL. The setting entered last will be cleared. Reenter it.
Before you begin, make sure “TIMER PLAY” or “TIMER REC” is not displayed. If either one is displayed, press STANDBY.
1 Tune in the radio station and insert an MD. 2 Press TIMER.
“TIMER PLAY” or “TIMER REC” flashes in the display.
Make the following settings by checking the indications in the display.
3 Turn the jog dial until “TIMER REC” flashes in the display, and press YES•ENTER.
4 Turn the jog dial until “RADIO” flashes in the display, and press YES•ENTER.
When recording from the component connected to the LINE IN jack of the player, turn the jog dial until “LINE” flashes in the display, and press YES•ENTER.
5 Set the timer to the hour and the minutes you want to start recording.
1Turn the jog dial to set the hour and press YES•ENTER.
2 Turn the jog dial to set the minutes, and press
YES•ENTER.continued
Timer The
The Timer 57GB