Labelling
recordings | EDIT DELETE INSERT |
|
(Name Function) | ¿ Jog dial | ÷ |
|
Either during recording or after recording, you can label the MDs and the tracks you have recorded with letters, numbers and symbols. You can input up to about 1,700 characters into each MD.
DISPLAY
YES
ENTER
recorded Editing
Notes
•When recording a CD containing CD text information, a track name appears in the display at the time of labelling. Change the name according to step 3 on page 50, if necessary, then press YES• ENTER. The track names that have been labelled on a CD will not be recorded on an MD until you press YES•ENTER to confirm it.
•Certain characters contained in the CD text information (É, å, ñ, ç, ß, [,], etc.) cannot be labelled on the MD. These characters will be labelled as blanks on the MD.
Labelling during recording
•You can label both MDs and tracks during synchronized recording of a whole CD (page 6) or the tracks you programmed (page 34).
•You can label the tracks only during synchronized recording of a single track – REC IT (page 33).
During synchronized recording of a whole CD or the tracks you programmed
You can label an MD or a track with up to 50 characters. You can label up to 30 tracks. If you want to label more than 30 tracks, label the tracks after recording (page 52).
1 During recording, press EDIT repeatedly until “Disc Name” or “Track Name” appears in the display, and press YES•ENTER.
When you label an MD, select “Disc Name”.
When you label a track, select “Track Name”.
2 When you label a track, turn the jog dial to select a track number in a CD, and press YES•ENTER.
When you label an MD, proceed to step 3.
continued
Editing recorded tracks on the MD
MD the on tracks
49GB