Other Operations
Recording on a video tape
You can record from a TV or a LD player using the receiver. You can also add audio from a variety of audio sources when editing a video tape. See your VCR’s instruction manual if you need help.
1Press TV/LD to select the programme source.
2Set the component to be ready for playing. For example, turn on the TV and TV tuner.
3Insert a blank video tape into the VCR for recording.
4Start recording on the VCR.
You can replace audio while editing a video tape
At the point you want to start adding different sound, press another function button (for example, CD) and start playback. The sound from the selected component will be recorded over the original audio.
To resume recording the original sound, press the TV/ LD function button.
Note
You cannot record the audio and video signal during 5.1 CH/DVD mode.
26GB
Using the controls on the remote, you can set the amplifier to turn off automatically at a time you specify.
SLEEP
>/.
Press SLEEP on the remote while the power is on. Each time you press SLEEP, the time changes as shown below.
n2:00:00 n1:30:00 n1:00:00 n0:30:00 nOFF
The display dims after you specify the time.
You can freely specify the time
Press SLEEP on the remote first, then specify the time you want using the cursor buttons (>or .).
The sleep time changes in 1 minute intervals. You can specify up to 5 hours.
You can check the time remaining before the amplifier turns off
Press SLEEP on the remote. The remaining time appears in the display.