Sony Model STR-DE435 Unpacking, Hookup Overview, Getting Started, Before you get started, Inserting batteries into the remote

Getting StartedUnpacking

Check that you received the following items with the receiver:

•FM wire aerial (1)

•AM loop aerial (1)

•Remote commander (remote) (1)

•Operating instruction for remote commander (1)

•Size AA (R6) batteries (2)

Inserting batteries into the remote

Insert two size AA (R6) batteries in accordance with the + and – markings on the battery compartment. When using the remote, point it at the remote sensor g on the receiver.

For details, refer to the operating instructions supplied with your remote.

When to replace batteries

Under normal use, the batteries should last for about 6 months. When the remote no longer operates the receiver, replace both batteries with new ones.

You cannot operate the following buttons on the RM-PP402 remote

•VIDEO2

•VIDEO3

•DVD

•PHONO

•SOUND FIELD A.F.D.

Notes

•Do not leave the remote in an extremely hot or humid place.

•Do not use a new battery with an old one.

•Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction.

•If you don’t use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

Hookup Overview

The receiver allows you to connect and control the following audio/video components. Follow the hookup procedures for the components that you want to connect to the receiver on the pages specified. To learn the locations and names of each jack, see “Rear Panel Descriptions” on page 31.

					DVD player/AC-3
		Video Component			decoder
		Hookups (6)
Speaker				Aerial Hookups (5)
			TV monitor
System					AM/FM aerial
Hookups (7)			TV tuner
	Front					Front
			LD player
						speaker
speaker
							(R)
	(L)
			VCR

		CD player	Centre	Active
			speaker	woofer
Rear
		MD/TAPE deck			Rear
speaker
					speaker
(L)	Audio Component
					(R)
	Hookups (5)

Before you get started

•Turn off the power to all components before making any connections.

•Do not connect the mains lead until all of the connections are completed.

•Be sure to make connections firmly to avoid hum and noise.

•When connecting an audio/video cable, be sure to match the color-coded pins to the appropriate jacks on the components: Yellow (video) to Yellow; White (left, audio) to White; and Red (right, audio) to Red.

4GB