kSpecifications
Power requirements | 100 – 240 V AC, 50/60 Hz |
Output voltage | DC OUT: 8.4 V, 0.6 A |
Operation temperature | 0°C to 40°C (32°F to 104°F) |
Storage temperature | |
Dimensions | Approx. 56 × 44 × 107 mm (w/h/d) |
| (2 1/4 × 1 3/4 × 4 1/4 in.) |
Mass | Approx. 120 g (4.2 oz.) |
| |
Battery used | |
Output voltage | DC8.4 V (Maximum) |
| DC7.2 V (Nominal) |
Capacity | 5.0 WAh |
Supplied accessories | See page 8. |
Design and specifications are subject to change without notice.
Warning messages
Various messages appear on the LCD screen. Check them with the following list.
Message | Meaning |
DRIVE ERROR | Trouble is with the disk drive. |
NO DISK | No disk has been inserted. |
DISK ERROR | Trouble is with the disk. |
| The floppy disk loaded is not |
| formatted (512 bytes × 18 sectors). |
|
|
DISK TYPE ERROR | The 2DD floppy disk is inserted. |
DISK PROTECT | The tab on the disk is set to the |
| position. |
DISK FULL | The disk is full. |
NO FILE | No image has been recorded on the disk. |
FILE ERROR | Trouble has occurred during playback. |
FILE PROTECT | The image is protected. |