(OPEN/CLOSE)
(Page
26)
(Page 31)
Note:
•All capacitors are in µF unless otherwise noted. pF: µµF 50 WV or less are not indicated except for electrolytics and tantalums.
•All resistors are in Ω and 1/4 W or less unless otherwise specified.
•% : indicates tolerance.
•C: panel designation.
•A: B+ Line.
•Power voltage is dc 1.5V and fed with regulated dc power supply from battery terminal.
•Voltage is dc with respect to ground under
no mark : PB
∗: Impossible to measure
•Voltages are taken with a VOM (Input impedance 10 MΩ ). Voltage variations may be noted due to normal produc- tion tolerances.
•Signal path. F : PB
– 27 – | – 28 – |
