Sony MZ-NH600 page, disc, open, items, Others, poorly, the disc, computer, appears), –MD”appears), The disc size, Some menu items, up the remaining, displayed on the

Symptom	Cause/Remedy
You cannot transfer	• The minimum recordable time on a disc is normally 2 seconds in
tracks that will fill	stereo, 4 seconds in LP2 stereo mode, and 8 seconds in LP4 stereo
up the remaining	mode. When you transfer a track from your computer, the recorder
recording time on	needs a 2-second (or 4- or 8-second) space for a track even if the track
the disc.	is under 2 seconds (or 4 or 8 seconds) in length. Also, the recorder
	inserts a 2-second (or 4 -or 8-second) space in between tracks during
	transfer operation. For this reason, the recorder needs an additional 6
	seconds (or 12 or 24 seconds) for each track. This reduces the
	maximum recording time for each track by 6 seconds (or 12 or 24
	seconds) during transfer operation (in MD mode only).
The disc size	• The difference is due to the use of the binary system to indicate the disc
displayed on the	size on the computer and the decimal system to express the disc size on
computer is not the	the disc and other recording media. For details on the disc size, see
same as the disc	page 60.
size printed on the
disc.
You cannot operate	• You cannot operate the recorder while the recorder is connected to the
the recorder (“PC –	computer.
–MD” appears).
The lid does not	• It happens if you disconnect the dedicated USB cable in the middle of a
open.	data transfer, recording, or editing operation on the computer, but while
	the dry alkaline battery is drained.
	, Reconnect the dedicated USB cable or insert a new dry alkaline
	battery into the recorder, and then press x.

Others

Symptom	Cause/Remedy
Some menu items	• “Menu Mode” is set to “Simple”.
cannot be displayed.	, Set the “Menu Mode” to “Advanced” to display all the menu
	items.
The recorder does	• The volume is low.
not work or works	, Turn up the volume.
poorly.	• No disc is inserted.
	, Insert a recorded disc.
	• The HOLD function is turned on (“HOLD” appears in the display
	when you press an operation button on the recorder).
	, On the recorder, disable HOLD by sliding the HOLD switch to the
	opposite direction of the arrow (pages 12, 13).
	• The lid is not firmly closed.
	, Close the lid until it clicks. Then slide OPEN to open the lid.
	• Moisture has condensed inside the recorder.
	, Take the MD out and leave the recorder in a warm place for several
	hours until the moisture evaporates.
	• The dry battery is weak (“LOW BATTERY” flashes or nothing
	appears).
	, Replace the dry battery with a new one.

72