Sony MZ-NH600 open, done, new ones, through an, “NotENOUGH, output when, or amplifier, There is no R, channel sound, While editing, 1GB Hi-MDdisc, Non-audiodata

Symptom	Cause/Remedy
There is no R-	• There is no R-channel output if the cassette deck or an amplifier is
channel sound	connected with a monaural cord.
output when	, Make sure to use a stereo connecting cord. If, however, the
playing a track	connected equipment is monaural, there will be no R-channel
recorded from a	sound output even with a stereo connecting cord.
cassette deck or
through an
amplifier, or when
listening to sound
from a cassette deck
or amplifier.

While editing

Symptom	Cause/Remedy
“NotENOUGH	• Editing is not possible when using a 1GB Hi-MD disc even when the
POWER TO EDIT”	battery level indication shows enough power remaining while the
appears and editing	recorder is stopped or playing. This is because of a mechanism that
cannot be done on a	disables editing when the remaining battery power is estimated by the
1GB Hi-MD disc.	recorder to be insufficient due to the high power consumption required
	for 1GB Hi-MD disc editing.
	, Insert a new alkaline dry battery or connect the AC power adaptor
	(not supplied) to the recorder.
The lid does not	• The power sources have been disconnected during recording or editing,
open.	or the battery have been exhausted.
	, Set the power sources again, or replace the exhausted battery with
	new ones.
Editing cannot be	• The power source has been disconnected or a power outage has
done.	occurred during editing.
	, The editing done to that point is not saved to the disc. Do the
	editing operation again.
Non-audio data	• Non-audio data cannot be erased with the Erase function.
cannot be erased.	, Confirm the contents by connecting the recorder to your computer.
	If it is okay to delete the contents, then perform the Format
	function (page 50).

continued

69