Sony MZ-R37SP Recording with digital input (optical cable required), To start/stop recording in sync with the source player (Synchro- recording), etc, plug, mini, plug

Recording with digital input (optical cable required)

Connect to a digital source using the supplied optical cable or POC-15B (not supplied) to make digital recordings. Digital recording is possible even from digital equipment with different sampling rates, such as a DAT deck or a BS tuner, using the built-in sampling rate converter.

CD player, MD	Portable CD
player, digital
	player, etc.
amplifier, etc.

Optical	Optical
plug	mini-
	plug
	POC-15B
	(not supplied)
	etc.
	Optical cable
	(supplied) etc.

to (OPTICAL)LINE IN

1 Insert a recordable MD and start recording.

For recording operations, see “Recording an MD right away !” (page 6). To record from a portable CD player, set the CD player to pause and then start recording.

(OPTICAL) LINE IN jack is for both digital and analog input

The recorder automatically recognizes the type of line cable and switches to digital or analog input.

To stop recording, press p.Notes

•You can make a digital recording only from an optical type output.

•When recording from a portable CD player, play it on AC power and disable the anti-skip function (such as ESP*).

•Digital output may be disabled on some portable CD players when the player is not run on AC power.

* Electronic Shock Protection

To start/stop recording in sync with the source player (Synchro- recording)

You can easily make digital recordings of a digital source on an MD.

Before synchro-recording, make connections to the digital source with a digital cable, and insert a recordable MD.

CD players,etc.p•CHARGESYNCHRO REC (at the bottom)continued

11