1 Slide SYNCHRO REC to ON.
“SYNC” appears in the display.Recording from a
microphone001 | Connect a stereo microphone | |
| supplied) to the MIC (PLUG IN POWER) | |
2 Press and slide REC upward. | jack. | |
| ||
The recorder stands by for recording. |
| |
3 Play the source sound. |
| |
The recorder starts recording when it | Stereo microphone | |
receives the playing sound. | ||
| ||
To stop recording, press p. |
| |
Notes | to MIC | |
| (PLUG IN | ||
•You cannot pause manually during | ||
| POWER) | ||
| ||
•When there is no sound from the player for |
| |
more than 3 seconds during synchro- |
| |
recording, the recorder goes into the |
| |
standby mode automatically. When the |
| |
sound comes from the player again, the |
| |
recorder resumes |
| |
recorder is kept in the standby mode for 5 |
| |
minutes or longer, the recorder stops |
| |
automatically. | 1 Insert a recordable MD and start | |
•Do not switch SYNCHRO REC after step 2. | ||
Recording may not be done properly. | recording. | |
•Even when there is no recorded sound on | Press and slide REC upward. | |
the sound source, there may be cases when | ||
“REC” lights up and recording starts. | ||
recording does not pause automatically | ||
For other operations, see “Recording | ||
during | ||
an MD right away! ” (page 6). | ||
level emitted from the sound source. | ||
| ||
z | To stop recording, press p. | |
|
When recording in monaural, follow steps 1 and 2 of “Recording in monaural for double the normal recording time” (page 13) before
Notes
•When recording sources with large sound, adjust recording manually to prevent distortion (see “Adjusting the recording level manually”, page 13).
•You cannot record through the microphone while an optical cable is connected to the (OPTICAL) LINE IN jack. The recorder automatically switches input in the following order; optical input, microphone input, and analog input.
•The microphone may pick up the operating sound of the recorder itself. Use the microphone away from the recorder in such cases.
12