Sony MZ-R4ST zPower sources, Set up for analog output from the station, Using on house current, Using on a lithium ion rechargeable battery, Battery life

Set up for analog output from the station

出力 (output) jacks

R(red) L(white)

RK-C310GS etc. (optional)

入力(input) jacks

Casette deck, amplifer, active speaker, etc.

zPower sources

Using on house current

See the illustration in the Japanese text (page 29)

Using on a lithium ion rechargeable battery

See the illustrations in the Japanese text (page 30).

You can charge the LIP-12(H) lithium ion rechargeable battery (supplied) on the recorder.

1Connect the station to an electical outlet.

2Insert the LIP-12(H) to the recorder and close the lid.

3Attach the recorder to the station. The battery will charge whether the power is on or off.

62

To charge the battery on the station.

1Slide the 充電池取出し(open the lid) switch to open the lid.

2Insert the battery and close the lid. When charging is completed, the charger lamp goes out.

Using on dry batteries/nickel metal hydride rechargeable battery

See the illustrations in the Japanese text (page 31).

Before using a nickel metal hydride rechargeable battery, you must charge it.

1Attach the supplied battery case.

2Insert two LR6 (size AA) dry batteries or a nickel metal hydride rechargeable battery with the recommended battery charger (not supplied).

Battery life

Batteries	Recording	Playback
LIP-12(H)	Approx.	Approx.
lithium ion	4hours	6.5hours
rechargeable
battery
R6(size AA)	Approx.	Approx.
Sony alkaline	2hours	4hours
dry batteries
LR6(SG)×2
BP-DM20	Approx.	Approx.
nickel metal	2hours	3hours
hydride
rechargeable
battery
LIP-12(H)	Approx.	Approx.
+LR6(SG)	6hours	10.5hours
×2
LIP-12(H)	Approx.	Approx.
+BP-DM20	6hours	9.5hours

When to replace the batteries

When the dry batteries or rechargeable battery are weak, flashing bor "Lo BATT" appears on display. Replace the dry batteries or charge the rechargeable battery.