zEditing recorded tracks

You can edit your recordings. Premastered MDs cannot be edited.

Notes

•When you press pafter erasing track marks, "TOC EDIT" flashes for about a second. Do not move or jog the recorder or disconnect the power source while the indication is flashing.

•You cannot erase track marks on an MD with the tab open for protection. Before erasing track marks, close the tab at the side of the

MD

Erasing a track

See the illustrations in the Japanese text (page 23).

You can quickly erase a recorded track. Note that once a recording has been erased, you cannot retrieve it.

1Play the track you want to erase.

2Press the 消去/削除 (erase/delete) button while playing the track. "Erase OK?→Push ERASE" appear in the display alternately, and the recorder plays the selected track repeatedly. Check the track number in the display.

To cancel erasing, press p.

3Press the 消去/削除 (erase/delete) button again to erase the track.

The track is erased from the MD and the remaining tracks are renumbered. The recorder starts to play the succeeding track. If you have erased the last track of the MD, the recorder pauses at the end of the preceding track.

To erase other tracks, repeat steps 1 to 3.

To erase a part of a track

Add track marks at the beginning and the end of the part you want to erase, then erase the part.

Erasing a whole disc

See the illustration in the Japanese text (page 23).

You can erase all the tracks on a disc at a time. Note that once a recording has been erased, you cannot retrieve it.

1Play the MD you want to erase and check the contents of the disc.

2Press pto stop.

3While pressing the 消去/削除 (erase/ delete) button, slide the 録音 (record) switch to the right.

"All Erase?" and "Push Erase" appear in the display alternately.

Make sure it is the right disc to be erased.

To cancel erasing, press p.

4Press the 消去/削除 (erase/delete) button again.

"TOC EDIT" flashes in the display. When erasing completes, "BLANK DISC" appears.

Insert a track mark

See the illustrations in the Japanese text (page 24).

You can insert a track mark into a track.

1Press トラックマーク (track mark) button when the part that you want to insert the track mark is playing. "Track Mark ON" flashes in the display, succeeding tracks will be renumberd.

You can insert the track number while recording.

Press トラックマーク(track mark) button while recording.

Instructions Operating

59