SymptomCause/Solution

No sound comes through the headphones.

•The headphones plug is not firmly connected.

b Plug in the plug of the headphones firmly to the remote control. Plug in the plug of the remote control firmly to 2/REMOTE.

•Volume is too low.

b Adjust the volume by pressing VOLUME +/– (VOL +/– on the remote control).

•AVLS is on.

b Slide AVLS to NORM (page 18).

An MD is not played from the first track.

•Disc playing stopped before it came to the last track.

b Press =repeatedly or open and close the lid once to go back to the beginning of the disc, and restart playing after checking the track number in the display.

Playback sound skips. • The recorder is placed where it receives continuous vibration.

b Put the recorder on a stable place.

•A very short track may cause sound to skip.

Sound has a lot of static.

•Strong magnetism from a television or such device is interfering

with operation.

b Move the recorder away from the source of strong magnetism.

Cannot find the track

• You pressed Pafter pressing =or +.

marks.

b Press Pbefore pressing =or +.

 

 

The rechargeable

• The rechargeable battery has been inserted incorrectly or the AC

battery does not start

power adaptor has been connected incorrectly.

charging.

b Insert the battery correctly or connect the AC power adaptor

 

correctly.

The clock loses time or the display flashes. The recording date was not stamped onto the disc.

•The built-in battery for the clock is weak.

b Connect the AC power adaptor to DC IN 3 V on the recorder and the wall outlet to charge the built-in battery. After charging, set the clock again (page 16). Note that the clock may gain or lose up to about 2 minutes per month under normal condition.

The lid does not open.

•The power sources have been disconnected during recording or

editing, or the batteries have been exhausted.

b Set the power sources again, or replace the exhausted batteries with new ones.

32