continued
TRACK MARK
Cancel labeling.
PLAY MODE
Delete a letter and move back all following letters to the left.
DISPLAY
Insert a blank space to type in a new letter.
=/(•+
Change the letter to the one before / next one.
VOL +/–
Move the cursor to the left or right.
P
Switch between capital letters, small letters, and marks / numbers.
Press/ Turn
To
3 Press p.
The disc is ready to be labeled.
4 Turn the control to select a letter and press pto enter.
The selected letter stops flashing and the cursor moves to the next input position.
Press DISPLAY for 2 seconds or more.
” : Name” flashes in the display.
2
p
Labeling a disc during stop
1 Insert a disc.
To label a disc that is already in the recorder, press pto stop.
VOL +/–
P
Control
TRACK
MARK
DISPLAY
PLAY MODE
On the remote control
2 To label a track, press EDIT/ENTER again.
To label a disc, press =or + repeatedly until ” 
: Name” flashes in the display, then press
EDIT/ENTER.
3 Follow steps 4 to 6 of ”Labeling a disc during stop” above.
To cancel labeling, press por T MARK.
Note
When the recording is stopped while labeling a track or a disc during recording, or when the playback moves on to the next track while labeling a track, the input at that point is entered automatically.
25