zPower sources

You can use the recorder on house current or as follows.

In the recorder …

–a nickel metal hydride rechargeable battery NH-14WM (supplied)

With supplied battery case …

–two LR6 (size AA) alkaline batteries (not supplied)

It is preferable to use the recorder on house current when recording for a long time.

Charging the nickel metal hydride rechargeable battery

Before using the supplied NH-14WM nickel metal hydride rechargeable battery for the first time, charge it in the recorder.

1 Connect the supplied AC power adaptor.

to wall outlet

AC power adaptor (supplied)

to DC IN 3V

2 Insert the NH-14WM into the recorder and close the lid.

p/CHARGE

3 Press p/CHARGE.

“charging” flashes, nappears in the display, and charging starts.

Full charging of a completely discharged rechargeable battery takes about 3 hours. To cancel charging, press p/CHARGE.

Notes

•Be sure to use the supplied AC power adaptor.

•Charging time may vary depending on the battery condition.

•When a rechargeable battery is charged for the first time or charged after a long period of disuse, battery life may be shorter than usual. Repeat discharging and recharging a few times. The battery life should return to normal.

•When the battery life of a fully charged rechargeable battery becomes about half the normal life, replace it.

•When carrying the rechargeable battery, keep it in the supplied carrying case. It is dangerous to carry the battery out of its case in your pocket or a bag together with metallic objects such as key rings, as this may cause a short circuit.

•Remove the rechargeable battery from the recorder when it is not to be used for a long time.

27