Press +when inputting alphabet, symbol or numbers to change the letter to the one before/next one. Press = to go back.

Press DISPLAY to insert a blank space to type in a new letter.

Press MODE to delete a letter and move back all following letters to the left.

Press por T MARK to cancel labeling.

5Repeat step 4 and enter all characters of the label name.

6Press EDIT/ENTER.

The track or disc is labeled.

Labeling a track during playback

1Insert a disc and play the track you want to label.

2Press EDIT/ENTER.

” : Name” flashes in the display.

3Press EDIT/ENTER again.

4Follow steps 4 to 6 of ”Labeling a disc during stop” above.

Labeling a track or a disc during recording

1Press EDIT/ENTER during recording. ” : Name” flashes in the display.

2To label a track, press EDIT/ENTER again.

To label a disc, press =or +

repeatedly until ” : Name” flashes in the display, then press EDIT/

ENTER.

3Follow steps 4 to 6 of ”Labeling a disc during stop” above.

When the recording is stopped while labeling a track or a disc during recording, or when the playback moves on to the next track while labeling a track during playback, the input at that point is entered automatically.

Labeling on the remote control

Labeling a disc during stop

1Insert a disc.

To label a disc that is already in the recorder, press pto stop.

2Press DISPLAY for 2 seconds or longer.

” : Name” flashes in the display.

3Press p.

The disc is ready to be labeled.

4Turn the control to select a letter and press pto enter.

The selected letter stops flashing and the cursor moves to the next input position.

Press pto switch between katakana, the alphabet, and symbols/numbers. Press VOLUME +/– to move the cursor to left or right.

Turn the control to (• +when inputting alphabet, symbol or numbers to change the letter to the one before/ next one. Turn to =to go back. Press DISPLAY to insert a blank space to type in a new letter.

Press PLAY MODE to delete a letter and move back all following letters to the left.

Press TRACK MARK to cancel labeling.

5Repeat step 4 and enter all characters of the label name.

6Keep pressing pfor 2 seconds or longer.

The track or disc is labeled.

Labeling a track during playback

1Insert a disc and play the track you want to label.

2Press DISPLAY for 2 seconds or longer..

” : Name” flashes in the display.

3Press p.

The disc is ready to be labeled.

4Follow steps 4 to 6 of ”Labeling a disc during stop” above.enter the selected character.

58