zEditing recorded tracks

You can edit your recordings. Premastered MDs cannot be edited.

Notes

•When you press pafter editing, "Toc Edit" flashes for about a second. Do not move or jog the recorder or disconnect the power source while the indication is flashing.

•You cannot edit on an MD with its tab open for protection. Before editing, close the tab at the side of the MD.

Erasing a trackSee the illustration in the Japanese text (page 24).

You can quickly erase a recorded track. Note that once a recording has been erased, you cannot retrieve it.

1Press EDIT/ENTER while playing the track you want to erase.

” : Name” flashes in the display, and the recorder plays the selected track repeatedly.

2Press =or +repeatedly until” : Erase” flashes in the display.

3Press EDIT/ENTER again. ”Erase OK?” and ”Push ENTER” appear alternately in the display.

To cancel erasing, press por T MARK.
To erase a part of a track

Add track marks at the beginning and the end of the part you want to erase, then erase the part.

Erasing a whole disc

See the illustration in the Japanese text (page 24).

You can erase all the tracks on a disc at a time. Note that once a recording has been erased, you cannot retrieve it.

1Press EDIT/ENTER on the recorder.

2Press =or +repeatedly until

” : Erase” flashes in the display.3Press EDIT/ENTER again.”All Erase?” and ”Push ENTER” appear alternately in the display.

To cancel erasing, press por T MARK.

4Press EDIT/ENTER again.”Toc Edit” flashes in the display, and all the tracks will be erased.When erasing is complete, ”BLANK DISC” appears in the display.Adding a track markSee the illustration in the Japanese text (page 25).You can insert a track mark into a track.

1While the recorder is playing or pausing an MD, press T MARK on the recorder at the point you want to mark.

"MARK ON" appears in the display, and the track mark is added.To add track marks while recording.

Press T MARK while recording (except while Synchro-recording).

56