Sony MZ-R55 zMD recording, Pause, Press Pagain to, resume recording, Record over, (, +or =to, partway through, find the start point of, the previous, recording and press

zMD recording

Recording an MD right away!

See the illustrations in the Japanese text (page 10 to 11).

Use a line cable (not supplied) to hook up an analog source. The sound will be sent from the connected equipment as analog signal but will be recorded digitally on the disc. If you want to record programs from digital equipments or a microphone, see "Various ways of recording".

Premastered MDs cannot be recorded over.

1Make connections (Connect securely). 1 Connect the LINE IN (OPTICAL) jack of recorder to the LINE OUT

R(red)/L (white) jacks of the source with a line cable.

The recorder switches to analog input automatically.

2Connect the DC IN 3V jack of the recorder to a wall outlet with the

supplied AC power adaptor. When the recorder has different sound sources connected at the same time, the recorder switches to the digital, microphone, or analog input in this order of priority.

2Insert a recordable MD.

1 Press OPEN and open the lid.

2 Insert a recordable MD with the label side facing up, and press the lid down to close.

3Select recording start point.

If you want to add a recording to the end of the previous recording, press

END SEARCH.

(If you want to start recording from the beginning, skip this step).

4Start recording.

1 Press and slide the REC switch to the right.

“REC” lights up and recording starts .

2Play the sound source.

The level of the recorded sound is adjusted automatically.

To stop recording, press p.

Do not move or jog the recorder or disconnect the power source while the “Data Save” or “Toc Edit” indication is flashing in the display.

To	Press
Pause	P.1)
	Press Pagain to
	resume recording.
Record over	(, +or =to
partway through	find the start point of
the previous	recording and press
recording	pto stop. Then slide
	the REC switch.
Remove the MD	p, then press OPEN
	and open the lid.2)

1)A new track mark is added at the point where you pressed P, and the recording will be marked with the new track number when you resume recording.

2)Once you open the lid, the point to start recording will change to the beginning of the first track. When recording on a recorded MD, check the point to start recording on the display.

If the recording does not start

Make sure the MD is not record-protected. If the tab at the side of the MD is open, slide it back so the tab is visible.

Note

If the power supply is disrupted (i.e. the battery is removed or becomes exhausted or the AC power adaptor is disconnected) when the recorder is operating, the lid will not open until the power is restored.

50