Erasing a track mark

See the illustrations in the Japanese text (page 25).

When you record with analog (line) input, unnecessary track marks may be recorded. You can erase a track mark to combine the tracks before and after the track mark.

1While playing the track with the track mark you want to erase, press Pto pause.

2Find the track mark by pressing = slightly.

"00:00" flashes in the display.

3Press the T MARK to erase the mark. ”MARK OFF” appears in the display. The track mark is erased and the two tracks are combined. The number of the newly combined track will be that of the first track and the succeeding tracks will be renumbered.

Moving recorded tracks

See the illustrations in the Japanese text (page 26).

You can change the order of the recorded tracks.

On the recorder

1Press EDIT/ENTER while playing the track you want to move.

” : Name” flashes in the display and the recorder plays the selected track repeatedly.

2Press =or +repeatedly until ”Move” flashes in the display.

3Press EDIT/ENTER again.

4Press =or +repeatedly to select the destination track number.

To cancel moving, press por T MARK.

5Press EDIT/ENTER again. The track moves to the selected destination track.

On the remote control

1Press DISPLAY for 2 seconds or longer while playing the track you want to move.

” : Name” flashes in the display and the recorder plays the selected track repeatedly.

2Turn the control until ” : Move” appears in the display.

3Press p.

4Turn the control to select the destination track number.

5Press pagain.

The selected track moves just before the destination track.

Labeling recordings

See the illustration in the Japanese text (page 27).

You can name tracks during playback, discs during stop, and both during recording. Each name can be as long as 200 letters.

Each disc can hold up to 1700 alphanumeric letters or 800 katakana characters during playback or stop, and 500 alphanumeric letters or 200 katakana characters during one recording.

Labeling on the recorderLabeling a disc during stop

1Insert a disc.

To label a disc that is already in the recorder, press pto stop.

2Press EDIT/ENTER.

” : Name” flashes in the display.

3Press EDIT/ENTER again.

4Press =or +repeatedly to select a letter and press (to enter.

The selected letter stops flashing and the cursor moves to the next input position.

Press pto switch between katakana, the alphabet, and symbols/numbers. Press VOLUME +/– to move the cursor to left or right.

continued

Instructions Operating

57