6 Press ENTER.

The Setup Display for selecting the aspect ratio of the TV to be connected appears.

7 Press X/x to select the setting that matches your TV type.

◆If you have a 4:3 standard TV

•4:3 LETTER BOX or 4:3 PAN SCAN (page 71)

◆If you have a wide-screen TV or a 4:3 standard TV with a wide-screen mode

• 16:9 (page 71)

8 Press ENTER.

The Setup Display for selecting the type of video signal appears.

9 Press X/x to select the type of signals you wish to output to your TV.

Select “PROGRESSIVE” only if you have made video pattern C(page 18) and wish to view progressive video signals.

◆Interlace format TV (standard TV)

• INTERLACE (pages 72)

◆Progressive format TV

• PROGRESSIVE (pages 72)

10Press ENTER.

The Setup Display for selecting the type of jack used to connect your amplifier (receiver) appears.

11Press X/x to select the type of jack (if any) you are using to connect to an amplifier (receiver), then press ENTER.

Choose the item that matches the audio connection you selected on pages 22 to

25 ( through ).

•If you connect just a TV and nothing else, select “NO.” Quick Setup is finished and connections are complete.

•Select “AUDIO OUTPUT L/R.” Quick Setup is finished and connections are complete.

•Select “DIGITAL OUTPUT.” The Setup Display for “DOLBY DIGITAL” appears.

or both

and

•Select “DIGITAL & 5.1CH OUTPUT.” The Setup Display for “DOLBY DIGITAL” appears.

12Press X/x to select the type of

Dolby Digital signal you wish to send to your amplifier (receiver).

Choose the signal that matches the audio connection you selected on pages 23 to

25 ( through ).

28