Hookups

Hooking Up the Player

Follow steps 1 to 6 to hook up and adjust the settings of the player.

Notes

•Plug cords securely to prevent unwanted noise.

•Refer to the instructions supplied with the components to be connected.

•You cannot connect this player to a TV that does not have a video input jack.

•Be sure to disconnect the power cord of each component before connecting.

Step 1: Unpacking

Check that you have the following items:

•Audio/video cord (pinplug ⋅ 3 y pinplug ⋅ 3) (1)

•Power cord (1)

•Remote commander (remote) (1)

•Size AA (R6) batteries (2)

Connecting the power cord

Connect the supplied power cord to the AC IN terminal of the player.

Step 2: Preparing the Remote

You can control the player using the supplied remote. Insert two Size AA (R6) batteries by matching the 3 and # ends on the batteries to the markings inside the compartment. When

using the remote, point it at the remote sensor on the player.

16