Note
If each of the front or rear speakers are not placed at an equal distance from your listening position, set the distance according to the closest speaker.
◆LEVEL (FRONT)
Varies the level of the front speakers. Be sure to set “TEST TONE” to “ON” for easy adjustment.
The default adjustments are in parentheses.
L (0 dB) | Set this between |
| dB in 0.5 dB increments. |
|
|
R (0 dB) | Set this between |
| dB in 0.5 dB increments. |
|
|
CENTER | Set this between |
(0 dB) | 0 dB in 0.5 dB increments. |
|
|
SUBWOOFER | For DVDs: |
(DVD: | (When “SIZE” are set to the |
SUPER | default settings): |
AUDIO CD: | Set this between |
0 dB) | and +10 dB in 0.5 dB |
| increments. |
| (When “SIZE” are not set to |
| the default settings): |
| Set this between |
| and +5 dB in 0.5 dB |
| increments. |
| For Super Audio CDs: |
| Set this between |
| +10 dB in 0.5 dB increments. |
|
|
◆LEVEL (REAR)
Varies the level of the rear speakers. Be sure to set “TEST TONE” to “ON” for easy adjustment.
The default adjustments are in parentheses.
L (0 dB) | Set this between |
| 0 dB in 0.5 dB increments. |
|
|
R (0 dB) | Set this between |
| 0 dB in 0.5 dB increments. |
|
|
To adjust the volume of all the speakers at one time
Use the amplifier’s (receiver’s) volume control.
◆TEST TONE
The speakers will emit a test tone. Use this when you use the 5.1CH OUTPUT jacks and adjust “LEVEL (FRONT)” and “LEVEL (REAR).”
OFF | The test tone is not emitted |
| from the speakers. |
|
|
ON | The test tone is emitted from |
| each speaker in sequence while |
| adjusting balance or level. |
|
|
1 Select “SPEAKER SETUP” in the Setup Display.
2 Select “TEST TONE” and set to “ON.”
You will hear the test tone from each speaker in sequence.
3 From your listening position, select “LEVEL (FRONT)” or “LEVEL (REAR)” and adjust the value using X/x.
The test tone is emitted from both left and right speakers simultaneously.
4 Select “TEST TONE” and set to “OFF” to turn off the test tone.
Note
The test tone signals are not output from the digital jack.
78